LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Servicing - A/T) >> Adjustment >> KICKDOWN Band (Front)

KICKDOWN Band (Front)

WARNING: This page is about a different car, the 1985 Plymouth Gran Fury, 1985 Dodge Diplomat, and 1985 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen adjusting screw lock nut, and back off 5 turns. After making sure adjusting screw turns freely in case, tighten screw to 72 INCH lbs. (8 N.m).
  2. Back off screw the specified number of turns given in the KICKDOWN BAND ADJUSTMENT. Hold adjusting screw in this position and tighten lock nut.
    NOTE: Kickdown band adjusting screw is located on left side of transmission case above throttle linkage lever on rear wheel drive models.
KICKDOWN BAND ADJUSTMENT

Application Back Off Screw
A-904-LA 2 1/2 Turns
scientia non olet · About LEMON Manuals