LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Servicing - A/T) >> Adjustments >> Shift Linkage >> Floor Shift

Floor Shift

WARNING: This page is about a different car, the 1984 Plymouth Gran Fury, 1984 Dodge Diplomat, and 1984 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen adjustable rod swivel lock screw, place selector in "PARK", and move shift lever on transmission all the way to rear (park position).
  2. Adjust swivel so no load is placed on linkage in either direction, and tighten swivel lock screw. Check adjustment so shift effort is free, detents are solid, and all gate stops are positive.
  3. Detent position should be close enough to gate stops in "NEUTRAL" and "DRIVE" so shift selector lever will not remain out of detent position when placed against gate and released. Starter should operate only in "NEUTRAL" or "PARK" positions.
scientia non olet · About LEMON Manuals