LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Servicing - A/T) >> Adjustments >> Shift Linkage >> Column Shift

Column Shift

WARNING: This page is about a different car, the 1984 Plymouth Gran Fury, 1984 Dodge Diplomat, and 1984 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place shift selector in "PARK" and loosen adjustable swivel lock screw making sure it is not restricted. Move shift lever on transmission all the way to rear (park position), then tighten swivel lock screw.
  2. Check adjustment by moving shift selector. Detents for "DRIVE" and "NEUTRAL" should be within limits of selector gate stops. Starter should operate only with selector in "PARK" or "NEUTRAL".
    Fig 1: Column Shift Linkage Adjustment
    G35243

    Adjustment made with shift lever in "PARK" position.

    Fig 2: Floor Shift Linkage Adjustment
    G35244

    Swivel located near transmission housing.

scientia non olet · About LEMON Manuals