LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Servicing - A/T) >> Adjustments >> KICKDOWN Band (Front)

KICKDOWN Band (Front)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1983 Plymouth Gran Fury, 1983 Dodge Mirada, 1983 Dodge Diplomat, 1983 Chrysler Imperial, and 1983 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate kickdown band adjusting screw at left side of transmission case, near throttle lever shaft. Loosen adjusting screw lock nut, and back off 5 turns. Make sure adjusting screw turns freely in case.
  2. Using special wrench (C-3380-A) with adapter (C-3705), tighten adjusting screw to 72 INCH lbs (8.1 N.m).
  3. Back off screw the specified number of turns given in the Kickdown Band Adjustment Table. Hold adjusting screw in this position and tighten lock nut to 35 ft. lbs. (47 N.m.).
scientia non olet · About LEMON Manuals