LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Removal & Installation - A/T) >> Transfer Case >> Removal

Transfer Case: Removal

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1990 Jeep Wrangler, 1990 Jeep Wagoneer, 1990 Jeep Grand Wagoneer, 1990 Jeep Comanche, and 1990 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place transfer case in Neutral. Raise and support vehicle. Drain transfer case lubricant. Place reference mark on drive shaft yokes and transfer case yokes for reassembly reference. Disconnect drive shafts and speedometer cable.
  2. Disconnect transfer case shift linkage. Disconnect vacuum hoses and electrical wiring from transfer case. Support transfer case with jack. Remove rear crossmember. Remove transfer case-to-transmission bolts. Remove transfer case.
scientia non olet · About LEMON Manuals