Model NP-205: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1988 Dodge Ramcharger, 1988 Dodge Ram Wagon, 1988 Dodge Ram Van, 1988 Dodge Pickup, and 1988 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Raise vehicle and drain transfer case. Replace plug. Disconnect speedometer cable. Remove skid plate, crossmember and strut rods as needed. Disconnect drive shafts and wire out of way. DO NOT allow drive shafts to hang free, as damage to universal joints may result.
- Disconnect shift lever rod from shift rail link. Support transfer case and remove transfer case-to-transmission adapter bolts. Move transfer case to rear until input shaft clears adapter. Lower transfer case from vehicle.