LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Removal & Installation - A/T) >> Transfer Case >> Model NP-208 >> Installation

Model NP-208: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1987 Dodge Ramcharger, 1987 Dodge Ram Wagon, 1987 Dodge Ram Van, 1987 Dodge Pickup, and 1987 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Install new transmission-to-transfer case gasket with sealer on both sides. Align transfer case with transmission. Rotate transfer case output shaft until transmission output shaft engages transfer case input shaft. Move transfer case until case seats flush against transmission. Install transfer case attaching bolts. Reverse removal procedures to complete installation.

scientia non olet · About LEMON Manuals