LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Removal & Installation - A/T) >> Transfer Case >> Model NP-208 >> Removal >> Installation

Model NP-208: Removal: Installation

WARNING: This page is about a different car, the 1984 Dodge Ramcharger, 1984 Dodge Ram Wagon, 1984 Dodge Ram Van, 1984 Dodge Pickup, and 1984 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Install new transmission-to-transfer case gasket with sealer on both sides. Align transfer case with transmission. Rotate transfer case output shaft until transmission output shaft engages transfer case input shaft. Move transfer case until case seats flush against transmission. Install transfer case attaching bolts. Reverse removal procedures to complete installation.

scientia non olet · About LEMON Manuals