LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Removal & Installation - A/T) >> Transfer Case >> Model NP-205 >> Removal >> Notes

Model NP-205: Removal: Notes

WARNING: This page is about a different car, the 1984 Dodge Ramcharger, 1984 Dodge Ram Wagon, 1984 Dodge Ram Van, 1984 Dodge Pickup, and 1984 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle and drain transfer case. Replace plug. Disconnect speedometer cable. Remove skid plate, crossmember and strut rods as needed. Disconnect drive shafts and wire out of way. DO NOT  allow drive shafts to hang free, as damage to universal joints may result.
  2. Disconnect shift lever rod from shift rail link. Support transfer case and remove transfer case-to-transmission adapter bolts. Move transfer case to rear until input shaft clears adapter. Lower transfer case from vehicle.
scientia non olet · About LEMON Manuals