LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Removal & Installation - A/T) >> Removal & Installation - Transfer Case >> Model NP-208 >> Installation

Model NP-208: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1983 Plymouth Voyager, 1983 Dodge Ramcharger, 1983 Dodge Ram Wagon, 1983 Dodge Ram Van, and 1983 Dodge Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Install new transmission-to-transfer case gasket with sealer on both sides. Align transfer case with transmission. Rotate transfer case output shaft until transmission output shaft engages transfer case input shaft. Move transfer case until case seats flush against transmission. Install transfer case attaching bolts. Reverse removal procedures to complete installation.

scientia non olet · About LEMON Manuals