LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Servicing - A/T) >> Adjustments >> Transmission Throttle Cable Adjustment >> Aisin Warner AW-4 Transmission

Aisin Warner AW-4 Transmission

WARNING: This page is about a different car, the 1990 Jeep Wrangler, 1990 Jeep Wagoneer, 1990 Jeep Grand Wagoneer, 1990 Jeep Comanche, and 1990 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. With ignition off, fully retract cable plunger. See Fig 1. Press cable button down and push cable plunger inward.
  2. Rotate throttle lever to wide open throttle position. While holding throttle lever in position, allow cable plunger to extend. When plunger is fully extended, release throttle lever. Cable is now adjusted.
    Fig 1: Retracting Cable Plunger
    G121182Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals