LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Servicing - A/T) >> Adjustment >> KICKDOWN (Front) Band >> Loadflite 727 & 999

Loadflite 727 & 999

WARNING: This page is about a different car, the 1989 Jeep Wrangler, 1989 Jeep Wagoneer, 1989 Jeep Grand Wagoneer, 1989 Jeep Comanche, and 1989 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate kickdown band adjusting screw on left side of case (near throttle lever shaft). See Fig 1. Loosen adjusting screw lock nut and back off approximately 5 turns. Ensure adjusting screw turns freely in case.
  2. Tighten adjusting screw to 72 INCH lbs. (8 N.m). If Adapter Extension (J-24063) is used, tighten adjusting screw to only 50 INCH lbs. (N.m). Back off adjusting screw 2 1/2 turns. Hold adjusting screw and tighten lock nut to 30 ft. lbs. (41 N.m).
Fig 1: Kickdown Band Adjusting Screw Location
G121178Courtesy of CHRYSLER LLC
scientia non olet · About LEMON Manuals