AW-4 Transmission with All Engines
WARNING: This page is about a different car, the 1988 Jeep Wrangler, 1988 Jeep Wagoneer, 1988 Jeep Grand Wagoneer, 1988 Jeep Comanche, and 1988 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- With ignition off, retract cable self-adjusting mechanism fully. Press cable button down and push cable plunger inward.
- Rotate throttle lever to wide open throttle position. While holding throttle lever in position, allow cable plunger to extend. When plunger is fully extended, release throttle lever. Cable is now adjusted.