AW-4 Transmission with All Engines
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1987 Jeep Wrangler, 1987 Jeep Wagoneer, 1987 Jeep Pickup, 1987 Jeep Grand Wagoneer, and 1987 Jeep Comanche. However, it is still accessible from the selected car via links, so may be relevant.
- With ignition off, retract cable self-adjusting mechanism fully. Press cable button down and push cable plunger inward.
- Rotate throttle lever to wide open throttle position. While holding throttle lever in position, allow cable plunger to extend. When plunger is fully extended, release throttle lever. Cable is now adjusted.