LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Servicing - A/T) >> Adjustment >> KICKDOWN (Front) Band

KICKDOWN (Front) Band

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1985 Jeep Wagoneer, 1985 Jeep Scrambler, 1985 Jeep Pickup, 1985 Jeep Grand Wagoneer, and 1985 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate kickdown band adjusting screw on left side of case (near throttle lever shaft). Loosen adjusting screw lock nut and back off approximately 5 turns. Ensure adjusting screw turns freely in case.
  2. Using Adapter (J-24063) and 5/16" square socket, tighten screw to 36 INCH lbs. (4 N.m). If adapter is not used, tighten screw to 72 INCH lbs. (8 N.m). Back off adjusting screw 2 1/2 turns. Hold adjusting screw in position and tighten lock nut to 35 ft. lbs. (48 N.m).
scientia non olet · About LEMON Manuals