Gearshift Linkage
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1988 Dodge Ramcharger, 1988 Dodge Ram Wagon, 1988 Dodge Ram Van, 1988 Dodge Pickup, and 1988 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- With column shift lever in "P" position, loosen adjustable swivel lock screw. Ensure swivel is free to move on shift rod. Disassemble and clean components if required.
- Move shift lever on transmission to full rear detent ("P") position and tighten swivel lock screw. When linkage is properly adjusted, detent positions for "N" and "D" will be within limits of shift lever gate stops and engine will start only in "P" or "N".