Gearshift Linkage
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1987 Dodge Ramcharger, 1987 Dodge Ram Wagon, 1987 Dodge Ram Van, 1987 Dodge Pickup, and 1987 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- With column shift lever in "P" position, loosen adjustable swivel lock screw. See Fig 1. Ensure swivel is free to move on shift rod. Disassemble and clean components if required.
- Move shift lever on transmission to full rear detent (Park) position and tighten swivel lock screw. When linkage is properly adjusted, detent positions for Neutral and Drive will be within limits of shift lever gate stops and engine will start only in "P" or "N".