LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Servicing - A/T) >> Adjustment >> Shift Linkage >> Floor Shift (FWD Models)

Floor Shift (FWD Models)

WARNING: This page is about a different car, the 1985 Dodge Ramcharger, 1985 Dodge Ram Wagon, 1985 Dodge Ram Van, 1985 Dodge Pickup, and 1985 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Place shift selector in "PARK" position. Loosen lock bolt on cable adjusting bracket on transaxle. Move shift lever on transaxle all the way to rear detent (park position) and hold. Tighten lock bolt.

NOTE: If it is necessary to disassemble linkage cable from lever, replace old plastic grommets with new ones. Use pliers to snap new grommet into lever and rod into grommet.
Fig 1: Floor Shift Linkage Adjustment (FWD Models)
G35240
scientia non olet · About LEMON Manuals