LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Servicing - A/T) >> Adjustment >> Shift Linkage >> Column Shift (RWD Models)

Column Shift (RWD Models)

WARNING: This page is about a different car, the 1984 Dodge Ramcharger, 1984 Dodge Ram Wagon, 1984 Dodge Ram Van, 1984 Dodge Pickup, and 1984 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place shift selector in "PARK" and loosen adjustable swivel lock screw making sure it is not restricted. Move shift lever on transmission all the way to rear (park position), then tighten swivel lock screw.
  2. Check adjustment by moving shift selector. Detents for "DRIVE" and "NEUTRAL" should be within limits of selector gate stops. Starter should operate only with selector in "PARK" or "NEUTRAL".
    Fig 1: Column Shift Linkage Adjustment (RWD Models)
    G35238

    Passenger car linkage shown. Trucks and Vans are similar.

scientia non olet · About LEMON Manuals