LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Servicing - A/T) >> Adjustment >> KICKDOWN Band (Front) >> All Models

All Models

WARNING: This page is about a different car, the 1984 Dodge Ramcharger, 1984 Dodge Ram Wagon, 1984 Dodge Ram Van, 1984 Dodge Pickup, and 1984 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate kickdown band adjusting screw at left side of transmission case, near throttle lever shaft. Loosen adjusting screw lock nut, and back off 5 turns. Make sure adjusting screw turns freely in case.
  2. Using special wrench (C-3380-A) with adapter (C-3705), tighten adjusting screw to 72 INCH lbs (8.1 N.m).
  3. Back off screw the specified number of turns given in the KICKDOWN BAND ADJUSTMENT  . Hold adjusting screw in this position and tighten lock nut to 35 ft. lbs. (47 N.m.).
    KICKDOWN BAND ADJUSTMENT

    Application Back Off Screw
    A-727, A-904T & A-999 2 1/2 Turns
scientia non olet · About LEMON Manuals