LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Servicing - A/T) >> Adjustments >> Shift Linkage >> Column Shift (RWD Models)

Column Shift (RWD Models)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1983 Plymouth Voyager, 1983 Dodge Ramcharger, 1983 Dodge Ram Wagon, 1983 Dodge Ram Van, and 1983 Dodge Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place shift selector in "PARK" and loosen adjustable swivel lock screw making sure it is not restricted. Move shift lever on transmission all the way to rear (park position), then tighten swivel lock screw.
  2. Check adjustment by moving shift selector. Detents for "DRIVE" and "NEUTRAL" should be within limits of selector gate stops. Starter should operate only with selector in "PARK" or "NEUTRAL".
Fig 1: Column Shift Linkage Adjustment (RWD Models)
G35238
scientia non olet · About LEMON Manuals