LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Servicing - A/T) >> Adjustments >> KICKDOWN Band (Front) >> All Models

All Models

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1983 Plymouth Voyager, 1983 Dodge Ramcharger, 1983 Dodge Ram Wagon, 1983 Dodge Ram Van, and 1983 Dodge Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locate kickdown band adjusting screw at left side of transmission case, near throttle lever shaft. Loosen adjusting screw lock nut, and back off 5 turns. Make sure adjusting screw turns freely in case.
  2. Using special wrench (C-3380-A) with adapter (C-3705), tighten adjusting screw to 72 INCH lbs (8.1 N.m).
  3. Back off screw the specified number of turns given in KICKDOWN BAND ADJUSTMENT  . Hold adjusting screw in this position and tighten lock nut to 35 ft. lbs. (47 N.m.).
KICKDOWN BAND ADJUSTMENT

Application Back Off Screw
A-727, A-904T & A-999 2 1/2 Turns
scientia non olet · About LEMON Manuals