LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Servicing - A/T) >> Adjustments >> KICKDOWN Band (Front)

KICKDOWN Band (Front)

WARNING: This page is about a different car, the 1988 Plymouth Gran Fury, 1988 Dodge Diplomat, and 1988 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Kickdown band adjusting screw is located on left side of transmission case above throttle linkage lever.
  1. Loosen adjusting screw lock nut, and back off 5 turns. After making sure adjusting screw turns freely in case, tighten screw to 72 INCH lbs. (8 N.m).
  2. Back off screw 2 1/2 turns. Hold adjusting screw in this position and tighten lock nut to 35 ft. lbs. (47 N.m.).
    KICKDOWN BAND ADJUSTMENT

    Application Back Off Screw
    RWD Models 2 1/2 Turns
scientia non olet · About LEMON Manuals