LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Servicing - A/T) >> Adjustments >> Shift Linkage >> Column Shift (RWD Models)

Column Shift (RWD Models)

WARNING: This page is about a different car, the 1987 Plymouth Gran Fury, 1987 Dodge Diplomat, and 1987 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place shift selector in "P" position. Loosen adjustable swivel lock screw, making sure swivel block is free to turn on shift rod. Move shift lever on transmission all the way to rear detent position ("PARK" position). Tighten swivel lock screw to 90 INCH lbs. (10 N.m).
  2. Check adjustment by moving shift selector. Detents for Drive and Neutral should be within limits of selector gate stops. Starter should operate only with selector in Park or Neutral. See Fig 1 .
Fig 1: RWD Models Column Shift Linkage Adjustment
G35238
scientia non olet · About LEMON Manuals