LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Servicing - A/T) >> Adjustments >> KICKDOWN Band (Front)

KICKDOWN Band (Front)

WARNING: This page is about a different car, the 1987 Plymouth Gran Fury, 1987 Dodge Diplomat, and 1987 Chrysler Fifth Avenue. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Kickdown band adjusting screw is located on left side of transmission case above throttle linkage lever.
  1. Loosen adjusting screw lock nut, and back off 5 turns. After making sure adjusting screw turns freely in case, tighten screw to 72 INCH lbs. (8 N.m).
  2. Back off screw 2 1/2 turns. Hold adjusting screw in this position and tighten lock nut.
KICKDOWN BAND ADJUSTMENT

Application Back Off Screw
All Models 2 1/2 Turns
scientia non olet · About LEMON Manuals