Matador & Ambassador

Disconnect battery, remove right side overlay panel and radio speaker. Remove instrument cluster overlay panel. On air conditioning and "Command Air" equipped vehicles, remove center duct. Use side cutters to notch overlay crash pad flange to expose duct retaining screw at upper right side. Remove two additional duct attaching screws and move duct to center (not necessary to remove duct). Remove four retaining screws from instrument cluster and three from radio. Disconnect and remove instrument cluster, pull out, but do not disconnect radio. On air conditioning and "Command Air" equipped vehicles, remove left side duct. Remove overlay crash pad by removing twelve hex head screws retaining panel to instrument panel.