Removal And Installation: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| 47.10.18 | FRONT DRIVE SHAFT INNER GAITER - LEFT HAND - RENEW | 4WD | 1 |
| 47.10.33 | REAR DRIVE SHAFT INNER GAITER - RENEW | ALL DERIVATIVES | 1.1 |
SPECIAL TOOL(S)
| 303-D121 Puller, General Purpose |
PART(S)
| STEP | PART NAME | QUANTITY |
| Installation Step 1 | Inner constant velocity joint boot kit | 1 |
| Installation Step 2 | Circlip | 1 |