Description And Operation: Overview

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The starting system is fitted with a starter motor incorporating a single solenoid, in a system with or without auto stop/start system.

Both types of starting system are passive systems controlled by the Powertrain Control Module (PCM). The PCM initiates starting system operation when a valid smart key is in the vehicle and the engine stop/start switch is pressed.

The PCM controls operation of the starter motor using a starter relay in the Engine Junction Box 2 (EJB 2).

On vehicles with an auto stop/start system the PCM interacts with other vehicle systems to determine when stop/start operation is required. An auto stop/start warning indicator provides a visual indication of when the engine is stopped in a stop/start cycle. The stop/start function is automatically activated each time an ignition cycle occurs. However, if required the driver can deactivate the system using an auto stop/start switch.

Vehicles with an auto stop/start system incorporate a brake vacuum sensor to enable the PCM to monitor the pressure in the brake booster during stop/start operation.