Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Note the installed position of the component(s) prior to removal.
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
- Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions .
- Refer to: Battery Disconnect and Connect .
- Refer to: Air Cleaner
(for 2.0L Diesel).
Refer to: Air Cleaner (for 3.0L V6 Petrol).
Refer to: Air Cleaner LH and Air Cleaner RH (for 2.0L Petrol).
- Refer to: Windshield Wiper Motor - LHD
.
Refer to: Windshield Wiper Motor - RHD .
- Refer to: Thermostatic Expansion Valve .
-
NOTE: This procedure must be carried out on both sides.
Refer to: Fender Splash Shield .
Torque Specification: 10 Nm
Torque Specification: 10 Nm
Vehicles with manual transmission
Vehicles with automatic transmission
All vehicles
Torque Specification: 10 Nm
- Refer to: *** Anti-Theft Alarm Horn (419-01, Removal and Installation).
Torque Specification: 10 Nm
-
NOTE: If equipped.
Vehicles with diesel engine
All vehicles
Torque Specification: 10 Nm
Torque Specification: 10 Nm
Torque Specification: 10 Nm
Torque Specification: 10 Nm
Torque Specification: 10 Nm
Torque Specification: 10 Nm