Electrical Wiring Harness Repair Components: Notes
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The electrical wiring harness repair components comprises of:
- Pre-terminated leads of different sizes and types
- Three sizes of splice connectors
- A selection of colored cable identification sleeves
- Two sizes of glue lined heat shrink sleeves
NOTE:
A suitable heat source, for shrinking the glue lined heat shrink sleeves will be required.
The pre-insulated diamond grip range of electrical connector terminals and in-line splice connectors are the only acceptable product for the repairs of wiring harnesses. The splice connectors not only grip the wire but also the insulation, making a very secure joint.