LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission RWD >> Torque Converter >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.

All vehicles 

  1. Raise and support the vehicle using a suitable 2 post lift. Refer to: Lifting .

4WD vehicles 

  1. Remove the transmission.

    Refer to: Transmission - INGENIUM I4 2.0L Petrol AWD  .

2WD vehicles 

  1. Remove the transmission.

    Refer to: Transmission - INGENIUM I4 2.0L Petrol RWD  .

All vehicles 

  1. CAUTION: Be prepared to collect escaping fluids.
    G11291832

    Using the special tools remove the torque converter.

    Special Tool(s):  307-613

scientia non olet · About LEMON Manuals