LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Starting System - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Starting System - INGENIUM I4 2.0L Petrol >> Starter Motor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: Lifting .

  2. Disconnect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

  3. Remove the air deflector.

    Refer to: Air Deflector .

  4. G11308048
    1. Release the cover.
    2. Disconnect the startup battery positive cable.
  5. Disconnect the wiring harness.
    G11308049
  6. Remove the starter motor.
    G11308050
scientia non olet · About LEMON Manuals