LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Starting System - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Starting System - INGENIUM I4 2.0L Petrol >> Starter Motor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the starter motor.

    Torque Specification: 48 Nm 

  2. Connect the wiring harness.

    Torque Specification: 7 Nm 

    1. Connect the startup battery positive cable.

      Torque Specification: 12 Nm 

    2. Secure the cover.
  4. Install the air deflector.

    Refer to: Air Deflector .

  5. Connect the battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals