Rear Window Regulators
| ITEM | DESCRIPTION |
|---|---|
| 1 | Rear door window |
| 2 | Rail carrier |
| 3 | Motor |
| 4 | Rail |
| 5 | Door module |
The door glass regulators are supplied as assemblies and are handed.
Front door glass regulator assembly's comprises of front and rear guide rails, a continuous cable and a motor. The door glass is located in two carriers, which are located in tracks in the guide rails.
Rear door glass regulator assembly's comprises of a guide rail, a continuous cable and a motor. The door glass is located in one carrier, which is located in the track in the guide rail.
Each carrier is attached to the cable, which is wrapped around a drum driven by the motor. When the motor is operated the drum pulls the cable in the required direction to raise or lower the carrier(s).
Each door glass regulator motor is connected to the related door module, which provides the power outputs to drive the motor and receives position inputs from two Hall sensors in the motor.