How To Use Diagnosis And Testing Procedures: Graphics
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
Test graphics show the measurement or test to be carried out in a test step.
A representative tester graphic is used for voltmeters and ohmmeters.
If multiple measurements are made in a single graphic, the test leads are drawn with a solid line until the test lead splits to indicate the multiple measurements, at which point dashed lines are used.
Breakout box type testers are represented by a double circle test pin. Test pins are labeled with the pin number.