LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Exterior Lighting -- XE (X760)) >> Exterior Lighting >> Turn Signal And Hazard Lamps >> Diagnosis And Testing >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM POSSIBLE CAUSE ACTION
Turn signal/hazard lamp(s) inoperative
  • Bulb failure
  • Fuse(s) blown
  • Circuit fault
  • Left-side steering column multifunction switch fault
  • Hazard lamp switch fault
Check the bulb and fuse condition. Check the turn signal/hazard lamp circuits. Check the left-side steering column multifunction switch function. Check the hazard lamp switch function. Refer to applicable System Wiring Diagram(s). Check for DTCs indicating a turn signal/hazard lamp circuit fault
Turn signal/hazard lamp(s) dim
  • Incorrect bulb rating
  • Circuit fault
  • Left-side steering column multifunction switch fault
  • Hazard lamp switch fault
Check the bulb condition and rating. Check the turn signal/hazard lamp circuits. Check the left-side steering column multifunction switch function. Check the hazard lamp switch function. Refer to applicable System Wiring Diagram(s)
Turn signal/hazard lamp(s) stuck on
  • Left-side steering column multifunction switch fault
  • Hazard lamp switch fault
  • Circuit fault
Check the turn signal/hazard lamp circuits. Check the left-side steering column multifunction switch function. Check the hazard lamp switch function. Refer to applicable System Wiring Diagram(s). Check for DTCs indicating a turn signal/hazard lamp circuit fault
Warning lamp(s) inoperative
  • Fuse(s) blown
  • Left-side steering column multifunction switch inoperative
  • Hazard lamp switch inoperative
  • Circuit fault
  • Instrument cluster fault
Check the fuse(s). Check the left-side steering column multifunction switch function. Check the hazard lamp switch function. Check the warning lamp circuits. Refer to applicable System Wiring Diagram(s). Check for DTCs indicating an instrument cluster or CAN system fault