LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Automatic Transmission/Transaxle External Controls - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Emergency Park Position Release Lever >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the emergency park position release lever to the bracket.
  2. Install the emergency park pistoling release lever
  3. Secure the clips.
    NOTE: If necessary, install new clips.
  4. install the bolts and secure the lever.

    Torque Specification: 11 Nm 

  5. Install the air deflector.

    Refer to: Air Deflector .

  6. Secure the clip.
    NOTE: If necessary, install new clips.
  7. Install the bolt and Secure the clips.
    NOTE: If necessary, install new clips.

    Torque Specification: 12 Nm 

  8. install the engine cover.

    Refer to: Engine Cover - INGENIUM I4 2.0L Diesel .