LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Rear Drive Axle/Differential -- XE (X760)) >> Rear Drive Axle/Differential >> Differential Front Bushing >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: Lifting .

    General Equipment: Two-post lift 

  2. Remove the rear differential case.

    Refer to: Differential Case - INGENIUM I4 2.0L Diesel .

    Refer to: Differential Case - V6 S/C 3.0L Petrol .

  3. Remove the bush.
    G11305796

    Special Tool(s): 204-335 

scientia non olet · About LEMON Manuals