LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Front Drive Axle/Differential -- XE (X760)) >> Front Drive Axle/Differential >> Differential Draining And Filling (G1895876) >> General Procedures

General Procedures

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
54.25.01 FRONT FINAL DRIVE UNIT - DRAIN AND REFILL ALL DERIVATIVES 0.7
G11345668
CAUTION:
  • Do not fill the differential with lubricant up to the filler plug. The filler plug is only used to fill the differential with lubricant, and not to act as a level indicator.
  • Make sure that the area around the component is clean and free of foreign material.
NOTE:
  • The only way to check the fluid level in the differential is to drain all the fluid out and refill with the correct quantity, shown in the specification section. For additional information, refer to: Specifications .
  • Some components shown removed for clarity.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    WARNING: Make sure to support the vehicle with axle stands.
  2. For additional information, refer to: Air Deflector .
  3. G11305833
  4. WARNING: Be prepared to collect escaping oil.
    G11305834
  5. Allow the fluid to drain.
  6. G11305834

    Torque Specification: 32 Nm

  7. Fill the differential with the correct amount of lubricant.
    CAUTION: Make sure the correct specification and quantity of oil is used.

    For additional information, refer to: Specifications .

  8. G11305833

    Torque Specification: 32 Nm

  9. For additional information, refer to: Air Deflector .
scientia non olet · About LEMON Manuals