Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Protect the surrounding paintwork to avoid damage.
NOTE:
- Removal steps in this procedure may contain installation details.
- Left hand illustration shown, right hand is similar.
- Make the supplementary restraint system (SRS) system safe. Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions .
- Refer to: Battery Disconnect and Connect .
- Refer to: Exterior Front Door Handle .
Torque Specification: 7 Nm
Torque Specification: 3.2 Nm
-
NOTE: Do not disassemble further if the component is removed for access only.