Visual inspection
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the customer concern
- Visually inspect for obvious signs of damage and system integrity
MECHANICAL - Brake pad(s) condition and installation
- Brake caliper(s) condition and installation
- Brake disc(s) condition and installation
- Parking brake disc(s) condition and installation
- Brake booster condition and installation
- Brake booster vacuum hose condition and installation
- Brake master cylinder condition and installation
- Hydraulic Control Unit (HCU)
- Brake fluid leaks
- Brake warning indicator
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
- If the cause is not visually evident, verify the symptom and refer to the Symptom Chart, alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index
- Check DDW for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as required