LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Body Panel System - Front End Body Panels -- XE/(760)) >> Front End Body Panels (G1817284) >> Removal And Installation >> Engine UNDERSHIELD - Project 8 (G2247311) >> Installation

Engine UNDERSHIELD - Project 8 (G2247311): Installation

WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    1. Install the engine undershield.
    2. Install and tighten the 6 bolts.

      Torque  : 9Nm 

    1. Install the 4 screws.
    2. Install the 4 bolts.
    3. Install the clip.
  3. Install the front splitter.

    Refer to: FRONT SPLITTER REPLACE - PROJECT 8

scientia non olet · About LEMON Manuals