LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Right Variable Valve Timing Oil Control Solenoid >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    NOTE: Lubricate the O-ring seals with clean engine oil.

    Install the variable valve timing oil control solenoids.

    G11308525
  2. Install the 4 bolts and connect the 2 electrical connectors.
    G11308523

    Torque Specification: 10 Nm 

  3. Install the Air Cleaner Outlet Pipe T-Connector.

    Refer to: Air Cleaner Outlet Pipe T-Connector (Installation).

scientia non olet · About LEMON Manuals