LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Left Camshaft Position Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle on a suitable 2 post lift. Refer to: Lifting .

  2. Remove the right air cleaner outlet pipe.

    Refer to: Right Air Cleaner Outlet Pipe .

  3. G00565422
    • Disconnect the 2 electrical connectors.
    • Remove the 2 retaining bolts.

      Torque Specification: 10 Nm 

scientia non olet · About LEMON Manuals