LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XE (X760)) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Engine Coolant Temperature Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine coolant temperature sensor and connect the electrical connector.
  2. Install the secondary bulkhead panel right.

    Refer to: Secondary Bulkhead Right Panel - V6 S/C 3.0L Petrol .

  3. Fill the coolant system.

    Refer to: Cooling System Draining and Vacuum Filling (General Procedures).

  4. Install the engine cover.

    Refer to: Engine Cover - V6 S/C 3.0L Petrol .

scientia non olet · About LEMON Manuals