Mass Air Flow Sensor (G1818356): Installation
WARNING: This page is about a different car, the 2020 Jaguar XF and 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new O-ring seal.
Renew Part: Mass air flow sensor O-ring seal Quantity: 1 .
- Install the Mass Air Flow (MAF) sensor.
Torque : 1.9 Nm
- Connect the MAF electrical connector.
- Secure the left air intake pipe.
Torque : 3.3 Nm
- Install the engine cover.
Refer to: ENGINE COVER - V6 S/C 3.0L PETROL