LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 162 (Engine Emission Control - V6 S/C 3.0L Petrol -- XF/(X260)) >> Engine Emission Control - V6 S/C 3.0L Petrol >> Removal And Installation >> Positive Crankcase Ventilation Cap >> Removal

Positive Crankcase Ventilation Cap : Removal

WARNING: This page is about a different car, the 2020 Jaguar XF and 2019 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Remove the engine cover.

    Refer to: ENGINE COVER - V6 S/C 3.0L PETROL .

  2. Remove the cowl panel.

    Refer to: COWL PANEL .

  3. CAUTION:
    • Damaging the positive crankcase ventilation cap is unavoidable.
    • Take care not to damage the camshaft cover.
    G13889088Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the positive crankcase ventilation cap.

  4. CAUTION: The positive crankcase ventilation cap spring will be under tension, take care when removing it from the camshaft cover.
    NOTE: Note the orientation of the positive crankcase ventilation cap seal and spring prior to removal.
    G13889089Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
scientia non olet · About LEMON Manuals