Control Diagram - InControl Touch 11 Speaker System
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
A = Hardwired: I = Composite Video Baseband Signal (CVBS): O = Local Interconnect Network (LIN) bus: T = Co-axial: AL = Pulse Width Modulation (PWM): AS = High Speed (HS) Controller Area Network (CAN) Infotainment systems bus: AT = Universal Serial Bus (USB): AU = Automotive Pixel Link 2 (APIX2): AV = High Speed (HS) Controller Area Network (CAN) comfort systems bus: AX = FlexRay.
| ITEM | DESCRIPTION |
| 1 | Audio Head Unit (AHU) |
| 2 | Powertrain Control Module (PCM) - Engine speed signal - Only on vehicles with active sound design |
| 3 | Body Control Module/Gateway Module (BCM/GWM) assembly - Engine torque, power mode and JaguarDrive mode signals |
| 4 | Audio Amplifier Module (AAM) |
| 5 | Sub-woofer speaker |
| 6 | Vehicle speakers (10 off) |
| 7 | Touch Screen (TS) |
| 8 | Ground |
| 9 | Power supply |
| 10 | Portable audio interface panel |
| 11 | Rear View Camera (RVC) - If equipped |
| 12 | Frequency Modulation (FM)/Digital radio (Band-3) antenna amplifier |
| 13 | Global Positioning System (GPS) signal splitter - If equipped |
| 14 | Roof pod |
| 15 | Amplitude Modulation (AM)/Frequency Modulation (FM) antenna amplifier |
| 16 | Microphone - Vehicles with telematics system |
| 17 | Telematics Control Module (TCU) - If equipped |
| 18 | Microphone - Vehicles without telematics system |
| 19 | Steering Wheel Module (SWM) |
| 20 | Left steering wheel switchpack |