Removal And Installation: Removal
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Make the SRS system safe.
Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions .
Refer to: Standard Workshop Practices .
- Refer to: Steering Wheel .
- Secure with adhesive tape.CAUTION: Make sure that the clockspring rotor does not rotate.
- Vehicles with electronic steering column.
- Vehicles with manual steering column.
- Do not disassemble further if the component is removed for access only.