LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2023 >> XF R-Dynamic SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Rear Suspension -- XE (X760)) >> Rear Suspension >> Upper Arm >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Nuts and bolts must be tightened with vehicle at normal ride height.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  2. Refer to: Wheel and Tire .
  3. NOTE:
    • Discard the nuts and bolts.
    • Using a suitable stand, support the wheel knuckle.
    G11305573

    Renew Part: Rear upper arm to wheel knuckle nut and bolt Quantity: 1

    Torque Specifications: 

    Stage 1: 60 Nm 

    Stage 2: 60° 

scientia non olet · About LEMON Manuals